Under the conventional method of connecting pipes, the two straight flanges will compress with an elastomer O-ring and form a connection. Where there is a turning point of flow direction, the connection is extended with an additional fitting or bending pipe to ensure the flow bend to a 90-degree direction.
With 90D SAE flanges, it connects pipes or tubes where a 90 degree turn of flow direction in the installation. No fitting or bending pipes is required and it reduces the friction in between connectors.
Risk reduced and creates a safe environment
Replacing SAE 90D Flanges minimizes the connector in the system installation.
Instead of 3 components to create a flow connection, now we required only 2 components which is SAE 90D Flange has replaced 2 components.
It helps in terms of reducing the risk of leakage and creates a safer environment.
The reduction of components application such as fittings and pipes reduces the overall cost of materials.
Tight connection
Allan cap screw and locking washer are types of fasteners used for the SAE 90D Flange assemble process.
The locking washer ensures the tight connection of a fastener.
It sets as the device to guide against loosens during operation.
SAE 90D Flange flat side is designed with 4 threaded holes in the 4 corners and the 4 holes serve as the position port for bolts and washers.
It combined to O-ring side (4 empty holes) to form a connection by inserting a washer and cap screw inside the 4 holes.
It ensures a tight connection between flange to flange to work under high-pressure system.