Weld-On SAE flanges are suitable for the connection of high pressure pipes. It has high strength. The testing method of a welding-on connection is reliable due to the 100% ray inspection.
It is widely used for pipes from small to big outer diameter sizes. There is bevel end of 30° for butt welding in order to match with the thickness and bevel of the pipe connection. Both bevel ends butted to the pipeline are welded.
Dual seal flange adapters
It provides a hydraulic solution for a high shock with four Allan cap screw connection styles and high vibration that can be used in various installation applications. It offered as an alternative to traditional SAE J518 flange connections. The flange adaptor, increases sealing capability, improves port retention, and elimination of costly field replacement due to application failure. Dual seal flange adapters incorporate both radial and face seal technologies. It helps to reduce the potential for flange system leakage and ingression of air, water-oil hydraulics oil that caused by side loading of traditional flange face to face sealing connections.
Variable flange installation areas location
The flange adapter is installed with a Split Flange.
The flange adapter welds to pipes sizes, while Split Flange is the flange body that connects to equipment or another half of the split flange.
There are two types of split flange: cut and uncut.
With the cut split flange installation with a flange adapter, it can be remodified without interrupting the system running flow.
They are used for provision in tight and limited areas.
